|Home||» Products||» Industrial Oil||» Oil Based White Shuttering Oil|
Oil Based White Shuttering Oil / Mould Release Agent Admixtures
DHC 50-SDA is a direct application shuttering release agent that provides quick, easy and clean
Release of concrete from shutter/forms. It provides a smooth, flat surface, free of voids and defects. It leaves concrete surfaces unstained, ready for re-use almost instantly.
Area of Application
Can be applied on metal, wood and plastic forms.
Precast moulds & plywood.
Features & Benefits
Acts as bond breaker and form cleaner.
Eliminates voids, defects and provides fair finished concrete.
Protects steel forms from rusting.
Cuts clean-up time.
Economical & easy to use.
Protects plywood forms from bulging due to water absorption.
Increases shutter life.
Method of Application
Clean the dust or dirt by wiping.
Used or rusted metal equipments must be cleaned thoroughly by wire brushing or abasing.
No pre-mixing is required before application. The product may be used directly from the container.
Apply brush, roller or sprayer. Coated forms may be used½ hour after application of DHC 50-SDA.
Safety & Precautions
Use mask, nose cover and hand gloves during application.
Clean hands with soap water after application.
Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
White colour low viscous liquid
0.83 + 0.02
1 Litre will cover approximately 30 to 35 m2 of forms depending upon application method and substrate.
DEVYANI BIOTECH All Rights Reserved.